Eachine Minicube 20x20mm Flytower Compatible Frsky Flysky DSM2/ DSMX Receiver F3 Blheli_S 10A ESC

  • 270.00 RM
  • Published date: April 4, 2017

CLICK HERE TO BUY
CLICK HERE TO BUY
CLICK HERE TO BUY


Eachine Minicube Flytower Frsky Flysky DSM2/ DSMX Satellite Compatible Receiver w/ F3 6DOF Built-in OSD Blheli_S 10A 4 In 1 ESC Dshot600


Eachine Minicube 20x20mm Flytower Compatible Frsky Flysky DSM2/ DSMX Receiver F3 Blheli_S 10A ESC
Eachine Minicube 20x20mm Flytower Compatible Frsky Flysky DSM2/ DSMX Receiver F3 Blheli_S 10A ESC

Eachine Minicube 20x20mm Flytower Compatible Frsky Flysky DSM2/ DSMX Receiver F3 Blheli_S 10A ESC
Eachine Minicube 20x20mm Flytower Compatible Frsky Flysky DSM2/ DSMX Receiver F3 Blheli_S 10A ESC
Eachine Minicube 20x20mm Flytower Compatible Frsky Flysky DSM2/ DSMX Receiver F3 Blheli_S 10A ESC
Eachine Minicube 20x20mm Flytower Compatible Frsky Flysky DSM2/ DSMX Receiver F3 Blheli_S 10A ESC
Eachine Minicube 20x20mm Flytower Compatible Frsky Flysky DSM2/ DSMX Receiver F3 Blheli_S 10A ESC

Eachine Minicube 20x20mm Flytower Compatible Frsky Flysky DSM2/ DSMX Receiver F3 Blheli_S 10A ESC
Eachine Minicube 20x20mm Flytower Compatible Frsky Flysky DSM2/ DSMX Receiver F3 Blheli_S 10A ESC
Eachine Minicube 20x20mm Flytower Compatible Frsky Flysky DSM2/ DSMX Receiver F3 Blheli_S 10A ESC

Eachine Minicube 20x20mm Flytower Compatible Frsky Flysky DSM2/ DSMX Receiver F3 Blheli_S 10A ESC


Description:

Brand name: Eachine

Mount hole: 20mm*20mm

Size: 27mm*27mm*20mm

Weight: 9.4g


1. Eachine Minicube Receiver 

1). Eachine Minicube DSM2/ DSMX satellite Receiver 


Frequency range: 2.403-2.479Ghz

Input power: 5V

Response time: 22ms / 11MS

Resolution: 2048

Display method: LED

Operating voltage: 3.3V

Working current: 60MA

Size: 27mm*27mm*7mm

Mount hole:20mm*20mm

Weight: 3.1 g

Antenna length: 100mm 

Data format: Serial port

Protoco: DSM2/DSMX

Distance: no ground interference (1 m from the ground ) > 300m

Uses: indoor small aircraft.

Compatible Transmitters: DSM2 / DSMX series of remote control
Built-in Buzzer (Low voltage alarm) Configure by Betaflight configurator


2). Eachine Minicube Flysky 8CH AFHDS2A receiver

Channels: PPM 8CH

Model type: Multi-rotor

Frequency range: 2.408-2.475GHz

2.4GHz system: AFHDS 2A

Work Mode: PPM

Transfer method: FHSS

Built-in Buzzer (Low voltage alarm) Configure by Betaflight configurator

Antenna length: 100mm

No ground interference ( Transmitting and receiving 1 m from the ground): >300m

Working current: 40mA

Size: 27*27*7mm

Mount hole:20mm*20mm

Weight: 3.1g

Compatible Transmitter: Compatible with FS-i4, FS-i6, FS-i6S, FS-i6X, FS-i10, FS-GT2E, FS-GT2G, FS-GT2F


3). Eachine Minicube Frsky Compatible 2.4G 8CH Receiver:


Frequency range: 2.403-2.479Ghz

Channels: 8CH 

Work mode :D8 Mode

Output: SBUS

Antenna length: 100mm

No ground interference ( Transmitting and receiving 1 m from the ground): >500m

Built-in Buzzer (Low voltage alarm) Configure by Betaflight configurator

Working current: 80mA

Dimensions: 27*27*7mm

Weight: 3.5g

Compatible with FRSKY ACCST 

Compatible with X9D(Plus)DJT/DFT/DHT

Telemetry: RSSI, 1S-3S voltage (A1), 1S-3S voltage (A2)


 




2. Eachine Minicube F3 6DOF Flight Controller:

Size: 27mm*27mm*5mm

Mount hole: 20mm*20mm

Processor: STM32 F303 MCU

Sensor: SPI Sensor MPU6000

Built-in Betaflight OSD ( Batt voltage, RSSI , Artificial Horizon , Fly mode , -Flytime, Craft name etz.)

Firmware version: Betaflight 3.1 Dshot ready

Target: OmnibusF3

 

3. Eachine Minicube 10A BLHeli_S 4 In 1 ESC:

Size: 27mm*27mm*5mm

Mount hole: 20mm*20mm

Firmware version: BLHELI_S 16.5

BB2, 48MHZ Chip

Lipo Battery: 2-3S

Con. Current: 10A

Peak Current: 15A (10S)

BEC: 5V @0.1A

Programming: YES

Betaflight passtrough ready

Dshot600 ready(Default)

Support oneshot42 oneshot125 Multishot Dshot

Damped light on

 

Features:

STM32 F303MCU + BLHELI_S ESC make your Operating feel more stabilly and silky

Jaw-dropping flight performance

LED_STRIP solder pin

BUZZER Ready

Betaflight support

Acro mode / Air mode /Angle mode support 

Built-in OSD(Using F3 MCU controls OSD over SPI bus in DMA mode)

OSD Configuration has been include in BETAFLIGHT GUI

Radio Stick to control PID Tunes

 

Package included:

1 x Minicube Receiver 

1 x Minicube F3 6DOF Flight Controller

1 x Minicube 10A BLHeli_S 4 In 1 ESC

CLICK HERE TO BUY


CLICK HERE TO BUY
CLICK HERE TO BUY

Leave your comment (spam and offensive messages will be removed)

Useful information

  • Avoid scams by acting locally or paying with PayPal
  • Never pay with Western Union, Moneygram or other anonymous payment services
  • Don't buy or sell outside of your country. Don't accept cashier cheques from outside your country
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"

Related listings